Fisher & Paykel DD36S Instrukcja Użytkownika Pobierz pdf

SAFETY AND WARNINGS

Important safety instructions!

Installation of this DishDrawer® requires basic mechanical and electrical skills.

Be sure to leave these Instructions with the Customer.

Installation must comply with your local building and electricity regulations.

At the completion of the DishDrawer® installation, the Installer must perform the Final Checklist.

Remove all packaging materials supplied with the DishDrawer®.

This DishDrawer® is manufactured for indoor use only.

Ensure all water connections are turned OFF. It is the responsibility of the plumber and

electrician to ensure that each installation complies with all Codes and Regulations.

The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required.

The switched power outlet must be outside the DishDrawer® cavity, so that it is accessible after

installation.

Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to

the power supply cord.

If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid

damage from water spillage.

Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not

be reused.

Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims.

If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle,

boat or mobile facility containing the product to the service shop at your expense or pay the service

technician’s travel to the location of the product.

DishDrawer®

Installation instructions

DD36S models

US CA

WARNING!

Electrical hazard

Before installing the DishDrawer®, remove the house fuse or open the circuit

breaker.

If permanently connecting the DishDrawer®, be sure the power is isolated and

the DishDrawer® unplugged.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped with a cord having

an equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and grounded in accordance

with all local codes and ordinances. WARNING - Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with

a qualified electrician or service representative if you are in doubt as to whether

the appliance is properly grounded.

If the DishDrawer is installed as a permanently connected appliance:

GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded

metal, permanent wiring system, or an equipment-groounding conductor must

be run with the circuit conductors and connected to the equipment-grounding

terminal or lead on the appliance.

Do not modify the power supply plug provided with the appliance - if it will not

fit the outlet, have a proper outlet installed by a qualified electrician. Do not use

an extension cord, adapter plug or multiple outlet box.

Failure to follow this advice may result in electrical shock or death.

Important!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our

local website listed at the end of this document or contact your local Fisher & Paykel dealer.

WARNING!

Cut hazard

Take care - panel edges

are sharp.

Failure to use caution could

result in injury or cuts.

95 lb

43 kg

WARNING!

Very Heavy

Do not attempt to lift this

product unassisted.

Lifting unassisted may

cause serious injury.

(1,1) -1- 599796A DD36S installA2 USCA.indd 19/2/10 11:32:01 AM

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Installation instructions

SAFETY AND WARNINGS1 Important safety instructions! Installation of this DishDrawer® requires basic mechanical and electrical skills. Be sure to lea

Strona 2 - (inches (mm))

23PRODUCT DIMENSIONS CABINETRY DIMENSIONSAFBCEEDGHIKProduct dimensions (inches (mm))Pre nishedDD36SDFTXIntegratedDD36STIAoverall height of product (i

Strona 3 - CAVITY PREPARATION

Important! Be sure the edges of the services hole are smooth or covered. If the services hole is through a metal partition the hole must be protected

Strona 4 - Ensure the drawer is

6OPTIONALLY HARD WIRING THE PRODUCT67812345 99101118191516171412131210ACBDEnsure the drawer is removed and then rotated counter-clockwise to prevent k

Strona 5 - REMOVE DRAWER

5512412344ROUTE HOSES & POWER CORD ROUTE HOSES & POWER CORD & MOVE INTO CAVITYATTACH SIDE MOUNTING BRACKETSREMOVE DRAWER78812Ensure the dr

Strona 6 - The product has three pairs

53132122MOVE INTO THE CAVITY SECURE THE DRAWERSECURE THE DRAWER REFIT THE DRAWER9910 1014235Before refitting the drawer, ensure the hoses are not twis

Strona 7 - PLUMBING AND DRAINAGE OPTIONS

12 1½”(38 mm)max. 4¾”(120 mm)63 54152 4317436229 ½” - 34 ¾”(750 - 882.5 mm)180o180o180o29 ½” - 34 ¾”(750 - 882.5 mm)5PLUMBING AND DRAINAGE OPTIONS1

Strona 8 - Spray arms

1312FINAL CHECKLIST TROUBLESHOOTINGCheck all parts are installed.Ensure product is level, securely fastened to the cabinetry and opens and closes free