Fisher & Paykel DD60D Instrukcja Użytkownika Pobierz pdf

DishDrawer®

Installation instructions

DD60D models

SAFETY AND WARNINGS

Important!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our

local website listed at the end of this document or contact your local Fisher & Paykel dealer.

NZ AU GB IE

WARNING!

Electrical shock hazard

Before installing the DishDrawer®, remove the house fuse or open the circuit

breaker.

This appliance must be earthed. In the event of a malfunction or breakdown,

earthing will reduce the risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped with a cord having an

equipment-earthing conductor and an earthing plug. The plug must be plugged

into an appropriate outlet that is installed and earthed in accordance with all

local codes and ordinances. WARNING- Improper connection of the equipment-

earthing conductor can result in a risk of electric shock. Check with a qualified

electrician or service representative if you are in doubt as to whether the

appliance is properly earthed.

Do not modify the power supply plug provided with the appliance - if it will not

fit the outlet, have a proper outlet installed by a qualified electrician. Do not use

an extension cord, adapter plug or multiple outlet box.

Failure to follow this advice may result in electrical shock or death.

WARNING!

Cut hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

Important safety instructions!

Installation of this DishDrawer® requires basic mechanical and electrical skills.

Be sure to leave these Instructions with the Customer.

Installation must comply with your local building and electricity regulations.

At the completion of the DishDrawer® installation, the Installer must perform the Final Checklist.

Remove all packaging materials supplied with the DishDrawer®.

This DishDrawer® is manufactured for indoor use only.

Ensure all water connections are turned OFF. It is the responsibility of the plumber and

electrician to ensure that each installation complies with all Codes and Regulations.

The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required.

The switched power outlet must be outside the DishDrawer® cavity, so that it is accessible after

installation.

Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to

the power supply cord.

If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid

damage from water spillage.

Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not

be reused.

Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims.

If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle,

boat or mobile facility containing the product to the service shop at your expense or pay the service

technician’s travel to the location of the product.

(1,1) -1- 599684B DD60D installA2 NZGB.indd 6/7/09 11:49:15 AM

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - SAFETY AND WARNINGS

DishDrawer®Installation instructionsDD60D models SAFETY AND WARNINGS1Important! SAVE THESE INSTRUCTIONSThe models shown in this document may not be

Strona 2

23PRODUCT DIMENSIONS CABINETRY DIMENSIONSOBCEDFJGHNIInstallation diagrams for illustration purposes onlyKLMANGCIProduct dimensions (mm)Pre nishedLCD

Strona 3 - Water supply

PARTS SUPPLIEDClamp (1)Wire clip (2)Phillips 16 mm screws (9)Drain hose support (1)Moisture protection tape (1)(to prevent moisture damage) Drain hose

Strona 4 - (excl. plug)

Left hand sideRight hand sideMax. distance of hoses and cord from chassis edgeLeft hand sideRight hand sideDrain hose2000 mm 1800 mmInlet hose1650 mm

Strona 5

x 41234512Tie together to avoid kinking.Ensure product is level and aligning with cabinetry. Using the most appropriate length Hexagonal socket suppli

Strona 6 - Important!

124543BACCBBA 123Aoptionalmax. 19 mm4 5 6 78 91019Important!D o not overtighten screw.SECURE THE PRODUCT AND REFIT THE DRAWER8ABFIT THE TOEKICK9Before

Strona 7 - PLUMBING AND DRAINAGE OPTIONS

PLUMBING AND DRAINAGE OPTIONS102316543180o7654180o2750-882.5 mm 38 mmmax. 120 mm750-882.5 mm1AIf space is limited for fixing, push hoses through dr

Strona 8 - TROUBLESHOOTING

FINAL CHECKLIST11TROUBLESHOOTING12Check all parts are installed.Ensure product is level, securely fastened to the cabinetry and opens and closes freel

Komentarze do niniejszej Instrukcji

Brak uwag

Fisher & Paykel DD60D Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Nie Fisher & Paykel DD60D. Fisher & Paykel DD60D User's Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Fisher & Paykel DD60D